PBOX X5FT-40-D (X5SL80W-12)
The X5 Dual can capture the maximum energy by setting direction of solar engine facing to the strongest solar radiation while lamp face to the site you want to illuminate. With split design, users will take the benefit of flexible installation as well as all in one features. X5 Dual uses a super aluminum frame, which is light weight, strong and corrosion resistant, making it able to resist strong wind load of up to 130MPH. Stainless steel screws are used as fasteners to protect against any harsh weather.
Simple installation, extremely practical
High Efficient Monocrystalline Module
19.6% photoelectric Conversion Efficiency
Ending with 85% output in 20 years
3.2mm tempered glass lamination for excellent mechanical load resistance.
IP65 Waterproof
The solar streetlights have to survive extreme cold and hot weather. The modular structure of the X5 is extremely good at protecting the essential parts of the streetlights. It reaches IP65 protection grade, effectively isolating humidity, dust and heat invasion, making it easy to overcome the challenges of harsh outdoor environments.
Battery determines system stability;
Management determines battery’s stability
Traditional solar powered streetlights use lead acid batteries that have a very short life cycle and are difficult to maintain, creating massive environmental pollution and a very low ROI. We therefore decided to use Lithium-ion batteries that have 3 times the life cycle, 4 times the discharge ability and are not harmful to the environment in our sealed product. However LiFePO4 Li-ion Battery batteries need a proper battery management system to avoid the “barrel effect”. X5 uses an exclusive patented technology battery management program, enabling the life span of battery to last for over 6 years, greatly improving the ROI and at the same time helping to sustain the earth’s resources.
High performance charging controller,
provides full protection for the system
The independent researched and developed charging controller generates more power, especially
during cloudy & rainy days. It simultaneously has protection for over current, over voltage and over
heating. Through the USB interface on the controller, it is able to easily modify its operating mode.
CREE LED ALUMINUM LAMP BASE
creates a first-class light source
Solar Engine Technical Data
Physical Parameters
Power of PV Module (W) | 130+130 | |
Lithium Battery Capacity (Wh) | 832+832 | |
Battery Heating Function | / | |
Dimension of Product (mm) | 1588x1042x126 | |
Net Weight of Product (kg) | 56 | |
Dimension of Carton (mm) | 1660x165x1120 | |
Gross Weight of Product (kg) | 62 |
Mount
EPA (effective projected area) (ft2) | 8.98 | |
APA (actual projected area) (ft2) | 7.48 | |
Wind Load Rate (mph) | 130 | |
Top of Pole or Tenon OD (mm) | 80~85 |
Light Parameters
Light Output (W) | 80 | |
Typical Luminous Flux (lm) | 12000 | |
LED Chip | CREE 5W LED | |
Qty. of LED Chips (pcs) | 4×18 | |
Optical Distribution | Bat Wing | |
Visual Angle (°) | 140°x70° | |
Color Temperature (K) | 5000/6000 | |
Light Photosensitivity (lx) | 30 | |
Working Mode | 4 hours x 100% | |
4 hours x 70% | ||
4 hours x 50% |
Physical Parameters
Dimension of Product (mm) | 804x166x90 | |
Net Weight of Product (kg) | 5 | |
Dimension of Carton (mm) | 865x260x240 | |
Gross Weight of Product (kg) | 14 |
Mount
EPA (effective projected area (ft2) | 0.65 | |
APA (actual projected area (ft2) | 0.54 | |
Wind Load Rate (mph) | 130 | |
Recommended Installation Height (m) | 8~12 | |
Recommended Installation Distance (m) | 30~45 | |
Top of Pole or Tenon OD (mm) | 65~90 |